2903033701 (=1513033701): OIL FILTER

The genuine and original Atlas Copco 2903033701 (=1513033701) spin-on oil filter for Atlas Copco air compressors — service every 2,000 operating hours. We sourced directly from Atlas Copco (Shanghai) Trading Co., Ltd. — brand-new, unopened, with original branded carton packaging.

Every unit we supply carries a clearly embossed Atlas Copco brand mark on its canister body, along with the unique ten-digit part number 2903033701 (=1513033701) and the maximum rated pressure of 15 BAR — both printed in sharp, permanent ink on the filter label, exactly as shown in the product photo above.

Each filter arrives sealed in an official Atlas Copco branded carton box bearing the company logo. Having personally handled and sold these filters, we can confirm with full confidence: these are authentic, brand-new original parts — procured from Atlas Copco (Shanghai) Trading Co., Ltd. in China and shipped without repackaging or modification.

Why Atlas Copco genuine oil filters outperform alternatives

Atlas Copco genuine oil filters are precision-engineered specifically for compressor environments — not adapted from generic filtration designs. They deliver outstanding separation efficiency that keeps oil consumption low and your compressor running clean.

A key safety feature: all metallic components within the filter are electrically bonded to one another, preventing the build-up of electrostatic charges. This significantly reduces the risk of internal sparks and fire — a critical consideration in industrial compressed-air systems.

Product specifications

How to replace the Atlas Copco spin-on oil filter

Always follow your compressor’s service manual and observe all safety precautions before beginning maintenance.

1. Power down and depressurise. Shut off the compressor, isolate it from the power supply, and fully release all system pressure. Allow the unit to cool to a safe handling temperature.
2. Position a drain tray. Place an oil-collection tray beneath the filter housing to capture any residual lubricant that drains during removal.
3. Remove the old filter. Using a suitable oil-filter wrench, turn the old filter anti-clockwise until it releases. Be prepared for a small amount of oil to spill as the seal breaks.
4. Clean the mounting surface. Wipe the filter head seating surface with a clean, lint-free cloth, removing any traces of old gasket material or residual oil.
5. Prepare the new filter. Apply a thin, even coat of fresh compressor oil to the rubber sealing gasket on the new Atlas Copco filter (part no. 1513 0337 01) to ensure a proper seal and easy future removal.
6. Install hand-tight. Thread the new filter onto the mount by hand until the gasket contacts the seating surface, then tighten by an additional ¾ turn — do not over-tighten with a wrench.
7. Refill and check oil level. Top up the compressor oil reservoir to the correct level as specified in the service manual, using the recommended lubricant grade.
8. Restart and inspect for leaks. Start the compressor and run it briefly at low load. Inspect the filter and surrounding area carefully for any sign of oil leakage. Shut down immediately if leak is detected and re-seat the filter.
9. Reset the service timer. Log the replacement in your maintenance record and reset the compressor’s service interval counter to ensure the next 2,000-hour change is prompted on schedule.

About Atlas Copco

Founded in Stockholm, Sweden in 1873, Atlas Copco has grown into one of the world’s foremost industrial technology groups, operating in over 180 countries and employing more than 40,000 people globally. The company’s compressor technique division is widely regarded as the benchmark for reliability, energy efficiency, and innovation in compressed-air systems.

Atlas Copco’s engineering philosophy is built on a simple principle: every component in a compressor system must be designed to work as part of a complete, optimised whole. That is precisely why genuine Atlas Copco spare parts — including this oil filter — are developed using the same engineering data, materials specifications, and quality standards as the compressors themselves. Using non-genuine parts can void warranties, shorten service life, and introduce safety risks that certified original parts are specifically designed to eliminate.

The part number 2903033701 (=1513033701) is an active, current listing within the Atlas Copco global parts catalogue, manufactured to ISO quality standards and exported from the company’s German production facilities.

ACD – Your reliable Atlas Copco spare-parts partner

We are a professional one-stop supplier of Atlas Copco air compressor systems and genuine air compressor parts. With over ten years of sales and maintenance experience, we provide reliable and cost-effective pre-sales consultation and after-sales technical support to industrial clients worldwide.

• 100% genuine, brand-new stock
  All parts sourced directly from Atlas Copco (Shanghai) Trading Co., Ltd. — never refurbished or replicated.
• Global shipping capability
  We serve industrial clients across multiple continents with reliable logistics and proper export documentation.
• 10+ years of field expertise
  Our technical team provides informed guidance on part selection, installation, and maintenance scheduling.
• Long-term partnership focus
  We aim to be your single trusted source for Atlas Copco consumables — from routine filters to complex system components.

More Filters List

Inquiry Now